Barra de iluminación led para mueble de 70cm con sensor/interruptor On/Off incorporado.
Ideal para iluminar el interior del cajón o del armario del mueble del lavabo o de la cocina.
FUNCIONAMIENTO:
Cuando abre el cajón o la puerta, detecta la apertura y se enciende. Al cerrar el cajón/puerta se apaga.
CARACTERÍSTICAS:
- Medida de la barra led: 665 x 12 x 12mm
- Color del aluminio: Blanco
- Longitud del cable de conexión: 1200mm
- Conector Jack
- Voltaje In (V): 12VDC
- Potencia (W): 4W
- Temperatura: 3000K
- CRI>90
- Sensor ON/OFF cierre cajón o puerta incorporado
- Área de detección: 2-80mm
- Fuente de alimentación NO suministrada
- Fabricado en ESPAÑA
- EAN:8436614475330
- HS CODE: 9405990000
ACCESORIOS de montaje incluidos:
- 2 soportes de plástico que se atornillan a los laterales del módulo de cocina, y la barra se sujeta a los soportes.
- 2 grapas metálicas para sujetar a la parte superior y la barra se sujeta a las grapas
ATENCIÓN:
- El sensor está instalado a la derecha, por lo que el funcionamiento idóneo es para las puertas con apertura hacia la izquierda.
- El receptor del sensor IR tendrá interferencias si recibe luz directa.
- La superficie reflectante no debe ser de color negro, transparente o translúcido.
- Necesita fuente de alimentación o batería a 12Vdc. (NO incluida)
- Le asesoramos para ofrecerle la indicada a su instalación y/o uso.
OTRAS MEDIDAS DISPONIBLES:
| MEDIDA MUEBLE MM | MEDIDA BARRA LED MM |
| 400 | 365x12x12 |
| 450 | 415x12x12 |
| 500 | 465x12x12 |
| 550 | 515x12x12 |
| 600 | 565x12x12 |
| 700 | 665x12x12 |
| 800 | 765x12x12 |
| 900 | 865x12x12 |
| 1000 | 965x12x12 |
| 1100 | 1065x12x12 |
| 1200 | 1165x12x12 |
Visite nuestra sección de baterías para los kits de iluminación.
BAJO PEDIDO:
- Corte a medida.
- Personalización de cableado y/o conectores
- Disponemos de una amplia gama de leds
- Consúltenos para más información
- 934 216 736 (de lunes a viernes, de 7 a 14h)
- Email: comercial@boeltronic.com
Barra de iluminación led para mueble de 70cm con sensor/interruptor On/Off incorporado.
Ideal para iluminar el interior del cajón o del armario del mueble del lavabo o de la cocina.
FUNCIONAMIENTO:
Cuando abre el cajón o la puerta, detecta la apertura y se enciende. Al cerrar el cajón/puerta se apaga.
CARACTERÍSTICAS:
- Medida de la barra led: 665 x 12 x 12mm
- Color del aluminio: Blanco
- Longitud del cable de conexión: 1200mm
- Conector Jack
- Voltaje de entrada (V): 12 VCC
- Potencia (W): 4W
- Temperatura: 3000K
- IRC>90
- Sensor ON/OFF cierre cajón o puerta incorporado
- Área de detección: 2-80 mm
- Fuente de alimentación NO suministrada
- Fabricado en ESPAÑA
- EAN:8436614475330
- CÓDIGO SA: 9405990000
ACCESORIOS de montaje incluidos:
- 2 soportes de plástico que se atornillan a los laterales del módulo de cocina, y la barra se sujeta a los soportes.
- 2 grapas metálicas para sujetar a la parte superior y la barra se sujeta a las grapas
ATENCIÓN:
- El sensor está; instalado a la derecha, por lo que el funcionamiento ideal es para las puertas con apertura hacia la izquierda.
- El receptor del sensor IR tendrá una conexión inalámbrica. interferencias si recibe luz directa.
- La superficie reflectante no debe ser de color negro, transparente o translúcido.
- Necesita fuente de alimentación o batería a 12Vdc. (NO incluido)
- Le asesoramos para ofrecerle la indicada a su instalación y/o uso.
OTRAS MEDIDAS DISPONIBLES:
MM
MM
Visita nuestra sección de baterías para los kits de iluminación.
BAJO PEDIDO:
- Corte a medida.
- Personalización de cableado y/o conectores
- Disponemos de una amplia gama de leds
- Consúltenos para más información
- 934 216 736 (de lunes a viernes, de 7 a 14h)
- Correo electrónico: comercial@boeltronic.com
LED lighting barfor 70cm furniture with built-in On/Off sensor/switch.
Ideal for illuminating the inside of the drawer or cabinet of the sink or kitchen cabinet.
OPERATION:
When you open the drawer or door, it detects the opening and turns on. When you close the drawer/door it turns off.
FEATURES:
- LED bar measurement: 665 x 12 x 12mm
- Aluminum color: White
- Connection cable length: 1200mm
- Jack connector
- Voltage In (V): 12VDC
- Power (W): 4W
- Temperature: 3000K
- CRI>90
- Built-in ON/OFF drawer or door closing sensor
- Detection area: 2-80mm
- Power supply NOT supplied
- Manufactured in SPAIN
- EAN:8436614475330
- HS CODE: 9405990000
Mounting ACCESSORIES included:
- 2 plastic supports that are screwed to the sides of the kitchen module, and the bar is attached to the supports.
- 2 metal clips to attach to the top and the bar attaches to the clips
ATTENTION:
- The sensor is It is installed on the right, so the ideal operation is for doors that open to the left.
- The IR sensor receiver will have interference if it receives direct light.
- The reflective surface must not be black, transparent or translucent.
- Requires 12Vdc power supply or battery. (Not included)
- We advise you to offer you the right one for your installation and/or use.
OTHER MEASURES AVAILABLE:
| FURNITURE SIZE MM | LED BAR SIZE MM |
| 400 | 365x12x12 |
| 450 | 415x12x12 |
| 500 | 465x12x12 |
| 550 | 515x12x12 |
| 600 | 565x12x12 |
| 700 | 665x12x12 |
| 800 | 765x12x12 |
| 900 | 865x12x12 |
| 1000 | 965x12x12 |
| 1100 | 1065x12x12 |
| 1200 | 1165x12x12 |
Visit our battery section for lighting kits.
ON REQUEST:
- Cut to size.
- Customization of wiring and/or connectors
- We have a wide range of LEDs
- Consult us for more information
- 934 216 736 (Monday to Friday, 7 a.m. to 2 p.m.)
- Email: comercial@boeltronic.com
LED lighting barfor 70cm furniture with built-in On/Off sensor/switch.
Ideal for illuminating the inside of the drawer or cabinet of the sink or kitchen cabinet.
OPERATION:
When you open the drawer or door, it detects the opening and turns on. When you close the drawer/door it turns off.
FEATURES:
- LED bar measurement: 665 x 12 x 12mm
- Aluminum color: White
- Connection cable length: 1200mm
- Jack connector
- Input voltage (V): 12 VDC
- Power (W): 4W
- Temperature: 3000K
- CRI>90
- Built-in ON/OFF drawer or door closing sensor
- Detection area: 2-80 mm
- Power supply NOT supplied
- Manufactured in SPAIN
- EAN:8436614475330
- SA CODE: 9405990000
LED lighting barfor 70cm furniture with built-in On/Off sensor/switch.
Ideal for illuminating the inside of the drawer or cabinet of the sink or kitchen cabinet.
OPERATION:
When you open the drawer or door, it detects the opening and turns on. When you close the drawer/door it turns off.
FEATURES:
- LED bar measurement: 665 x 12 x 12mm
- Aluminum color: White
- Connection cable length: 1200mm
- Jack connector
- Voltage In (V): 12VDC
- Power (W): 4W
- Temperature: 3000K
- CRI>90
- Built-in ON/OFF drawer or door closing sensor
- Detection area: 2-80mm
- Power supply NOT supplied
- Manufactured in SPAIN
- EAN:8436614475330
- HS CODE: 9405990000
Mounting ACCESSORIES included:
- 2 plastic supports that are screwed to the sides of the kitchen module, and the bar is attached to the supports.
- 2 metal clips to attach to the top and the bar attaches to the clips
ATTENTION:
- The sensor is It is installed on the right, so the ideal operation is for doors that open to the left.
- The IR sensor receiver will have interference if it receives direct light.
- The reflective surface must not be black, transparent or translucent.
- Requires 12Vdc power supply or battery. (Not included)
- We advise you to offer you the right one for your installation and/or use.
OTHER MEASURES AVAILABLE:
| FURNITURE SIZE MM | LED BAR SIZE MM |
| 400 | 365x12x12 |
| 450 | 415x12x12 |
| 500 | 465x12x12 |
| 550 | 515x12x12 |
| 600 | 565x12x12 |
| 700 | 665x12x12 |
| 800 | 765x12x12 |
| 900 | 865x12x12 |
| 1000 | 965x12x12 |
| 1100 | 1065x12x12 |
| 1200 | 1165x12x12 |
Visit our battery section for lighting kits.
ON REQUEST:
- Cut to size.
- Customization of wiring and/or connectors
- We have a wide range of LEDs
- Consult us for more information
- 934 216 736 (Monday to Friday, 7 a.m. to 2 p.m.)
- Email: comercial@boeltronic.com
LED lighting barfor 70cm furniture with built-in On/Off sensor/switch.
Ideal for illuminating the inside of the drawer or cabinet of the sink or kitchen cabinet.
OPERATION:
When you open the drawer or door, it detects the opening and turns on. When you close the drawer/door it turns off.
FEATURES:
- LED bar measurement: 665 x 12 x 12mm
- Aluminum color: White
- Connection cable length: 1200mm
- Jack connector
- Input voltage (V): 12 VDC
- Power (W): 4W
- Temperature: 3000K
- CRI>90
- Built-in ON/OFF drawer or door closing sensor
- Detection area: 2-80 mm
- Power supply NOT supplied
- Manufactured in SPAIN
- EAN:8436614475330
- SA CODE: 9405990000
ATTENTION:
- The sensor is installed on the right, so the ideal operation is for doors that open to the left.
- The IR sensor receiver will have a wireless connection. interference if it receives direct light.
2 YEARS WARRANTY
Contacto
- Avda. de la Fama, 118
- info@boeltronic.com
- +34 934 216 736
Métodos de pago
© Copyright 2024 | Aviso legal | Política de privacidad | Cookies | Desarrollo web: boeltronic